|
 |
Vane Mist Eliminators
Construction
: It consists of closely spaced corrugated
plates that forces mist laden gas to follow
serpentine paths. Vane arrays can be mounted
horizontally or vertically. They are
preferred in applications involving high
vapor velocities, low available pressure
drops, viscous or foaming liquids .viscous
liquids, slugs of liquids, or violent
upsets, vane units are usually round or
rectangular very similar to mesh pads.
SHREE WiRE produces high capacity vane type
mist eliminators for free water droplet
removal from vapor streams up to 99% removal
of droplets 8 micron and larger. |
|
SHREE WiRE vanes are rigid in construction
and suitable for several services which may
include high vapor velocity, high vibration,
high temperature, high corrosion, or
particulate fouling. Engineered vane units
commonly replace original mesh type mist
eliminators when one of the following
conditions occurs:
-
Capacity of conventional mesh pad is
exceeded
-
Short service life and increased
pressure drop due to mesh fouling
-
Excessive corrosion of mesh wire occurs
Based on your application and process
conditions, SHREE WiRE will assist you in
your mist elimination equipment selection
and individually engineer the performance of
your replacement or upgrade vane mist
elimination system. Vane units are available
in various materials but specialty designs
are available by special request for any
non-patented replacement in kind
requirement.
Applications
:- Absorber, Drying tower, Gas turbines,
Extraction columns, Reboiler etc.
|
